David's Images of the Day Photoblog
Views of buildings
Winter View of the Thingvellir (Þingvellir) Church. Thingvellir (Þingvellir) National Park. Image taken with a Fuji X-T1 camera and 23 mm f/1.4 lens (ISO 200, 23 mm, f/5.6, 1/250 sec).
I had some time to do a walkabout in Reykjavik, Iceland on a rainy winter day before joining a photo safari. These images were all taken with a Leica X2 camera, my favorite small travel camera.
Pictures of a squirrel in my backyard after finding a nut. The images were taken with a Nikon 1 V1 camera, FT1 adapter, and 70-200 mm f/2.8 VRII lens. I prefer the squirrels outside rather than doing damage in my attic. I’ve put up flashing Christmas lights and ultrasonic noisemakers in my attic to try keeping them outside. That worked for a while, but they ultimately came back. Finally it took traps and the physical removal of 8 nests. All of the insulation in the attic needed to be replaced, as well as the electrical wiring that had been chewed. The cedar shake siding on house was replaced with a concrete composite, and the soffits all replaced. Now all of the ways into the attic have been blocked.
The temperatures dropped from nearly 70°F (~20°C) yesterday to below freezing most of today. It was sunny most of the day, so the solar panels were generating electricity (50.3 kWh). Later in the afternoon some clouds rolled in, and we had a quick snow storm. I went out to get some pictures of the flowers that recently bloomed across the street with the recent snow before the sun went down. I also got some pictures of a turkey vulture soaring above my backyard in the late afternoon sun.
Although my neighbor got lots of maple sap from his trees this year, the tap he put in my maple tree didn’t produce much. Since it did get cold again, I will drill a new hole and see if I get anything. Maybe, my maple tree feels it already gave too much to the cicadas that live for 13 or 17 years under the tree.
After the storm passed, some clouds lit up as the sun went down.
Wall hanging system for prints being prototyped in my laundry room — A work in Progress. The goal was to design and build a simple system to display prints on walls in my house, and then deploy the system in many rooms as the house is renovated. I wanted something that would allow me to easily move or change the prints being displayed, and not need to use picture frames, or picture hanging hardware. The first attempt used a map hanging system. This limited me to rows of the same size [letter – 8-1/2″ x 11″; B+ – 13″ x 19″; or C – 17″ x 22″]. One other idea was to hold the prints up with magnets. This was first attempted using parallel strips of flexible 3M magnetic tape attached to the drywall. I tried a number of small magnets, but none were strong enough to hold prints larger than 8 1/2″ by 11″ and especially prints on thick archival papers. Looking for other options I found that cold-rolled steel had a stronger magnetic attraction. For the prototype I mounted thirteen 1″ x 0.125″ x 72″ steel bars on the wall. These were attached by drilling holes in the steel bars and then screwing into the studs behind the drywall. An image of the prototype is shown below. I used a series of different sized images from the day before starting the Spring 2016 Semester at Sea voyage. Future work will be optimizing the placement of the steel bars to work with letter, B+, and C sized prints. The steel bars will be painted the same color as the wall, and the round ceramic magnets will be painted white. Image taken with a Fuji X-T2 camera and 23 mm f/1.4 lens (ISO 200, 23 mm, f/1.4, 1/125 sec) pop-up flash bounced off the ceiling.
