Sometimes Technology Keeps Me From Doing What I Really Want To Do.
I know that I said that I would try to be posting something daily again, but ran into some technology issues. This weekend, I got an e-mail/text message from ATT that I had exceeded 26 GB of wireless data, and that that each 1 GB above my 5 GB/month would be charged at $10/GB. This was really surprising in that it indicated that I had used over 19 GB in one day. I only uploaded a few images (jpg’s not raw) and hadn’t downloaded any big programs or movies. My 4G connection to the Internet via ATT through my phone is good, but not good enough to upload/download 19 GB in one day. I had been moving some of my backup hard drive data from a Synology disk array to an old Drobo Disk Array, but via a hard-wired Ethernet connection. I did some checking to make sure that my internal data transfer wasn’t being broadcast either WiFi or onto the ATT network. During the process I made some changes to the networking configuration on my main image processing computer. The downside – I could no longer connect to the internet with this computer,. ARRG!! This is the computer that I do all of my image uploading to PhotoShelter, Google+, and my Blog. Well, I tried a number of fixes to the networking, but still couldn’t get my main computer to connect to my phone and bridge to the internet.
OK – what to do? As I mentioned the other day, I just set up a HP MediaServer (Windows HomeServer). One of the things that the HomeServer does is backs up each computer connected to it every night (first time full backup, and then incremental backup of any changes thereafter). This will be a good test to see if I can reset my main image processing computer back to where it was before I made any changes. Because I am paranoid about these type of major changes, before I did anything I ordered a new Crucial M500 SSD (solid state drive). I this regard Amazon is great in that I could order the drive, and have it delivered in less than 24 hours. (I was even more surprised when the new SSD drive arrived and found it to be 960 GB, rather than 500 GB). I used the Apricorn EZ-GIG-IV hardware and software to make an exact copy of the boot drive before I try to use the HomeServer software to recover/restore the original SSD drive to a state before I made any of the networking changes. I’m posting this from a different computer and will let you know if it works.
The next day I got an e-mail/text message from ATT that I really only used 1 GB of excess wireless data. I still plan to do the recovery/restore to confirm that the process works. This post is from my backup computer, and I really need to get my main image processing computer back on to the Internet so I can post some new images.