Day: July 4, 2011

Monday (04-July-2011) — New Jersey

Summertime in New Jersey.

It was a bit foggy this morning after all of the rain and thunderstorms yesterday. I saw this lone rower on the Delaware river out early between Lambertville, New Jersey and New Hope, Pennsylvania.

Rower in the mist. Delaware River between Lambertville and New Hope. Image taken with a Nikon D3x and 105 mm f/2.8 VR macro lens + TC-E III 20 teleconverter (ISO 100, 210 mm, f/9, 1/125 sec). Raw image processed with Capture One Pro 6 and Photoshop CS5. (David J Mathre)
Rower in the mist. Delaware River between Lambertville and New Hope. Image taken with a Nikon D3x and 105 mm f/2.8 VR macro lens + TC-E III 20 teleconverter (ISO 100, 210 mm, f/9, 1/125 sec). Raw image processed with Capture One Pro 6 and Photoshop CS5.

.

Four-Years Ago (04-July-2007) — Colorado

Summer in Colorado. Railroad to Pikes Peak.

Four years ago on a lark I drove from Boulder to Colorado Springs and then to Manitou Springs to take the Cog Wheeled Railroad to the summit of Pikes Peak. Little did I know that you needed reservations for the cog rail trip to Pikes Peak, and that all trips were sold out for the day. I was very lucky that someone in line before me was unhappy that their party was not all sitting together and turned in their tickets. Once I got on board the train, I realized that I won the lottery since my ticket was for the front seat. This allowed me to set up a tripod and camera to capture images for a time-lapse video for the train ride. So as not to annoy the other passengers on the train I used a small Gitzo travel tripod, my smallest camera body, and a small lens. Going up the mountain I used a 18-200 mm lens at 18 mm. Going down the mountain my seat was now in the rear of the train looking back. For this I used a 10.5 mm fisheye lens. This was a case of being in the right place at the right time!!!

Steam Engine at Pikes Peak Cog Railroad. Image taken with a Nikon D200 and 10.5 mm f/2.8 fisheye lens (ISO 100, 10.5 mm, f/5.6, 1/250 sec). Raw image processed with Capture One Pro, Focus Magic, Topaz Define, and Photoshop CS5. (David J Mathre)
Steam Engine at Pikes Peak Cog Railroad. Image taken with a Nikon D200 and 10.5 mm f/2.8 fisheye lens (ISO 100, 10.5 mm, f/5.6, 1/250 sec). Raw image processed with Capture One Pro, Focus Magic, Topaz Define, and Photoshop CS5.