August, 2013 - David Mathre Photography

Saturday (24-August-2013) — New Jersey

Adobe Creative Cloud Licensing Crap.

Background, I have been using Adobe Photoshop since its first Windows version – I got it as a free replacement to the photo editing software (don’t remember the name, it was 20 years ago – may have been from Aldus?) that either came from a scanner or an original Logitech 64K camera. Earlier this year before going on a 52 day Semester at Sea Spring Enrichment Voyage, I purchased a Microsoft Surface Pro computer. The operating system for the #Surface is Window 8, fully functioning running all Windows programs. Although the Surface is a “touch-pad” computer, I got it with the detachable keyboard. It is much lighter than my other travel (Lenovo ThinkPad W510) computer. The screen resolution is the same, and the Surface has a faster processer. For photo-editing during the trip I installed Capture One Pro 7 (Phase One), Lightroom, and Photoshop (Adobe). Although I had a license for Adobe CS6, I decided to try out the recently released Adobe #creativecloud (I also use Premier Pro, InDesign, and Illustrator) on a 1 year trial basis. When it was announced that Adobe would be switching its licensing to Creative Cloud only subscriptions there was a lot of churn on the internet. Folks were afraid that the programs would only be on the internet (not true – programs still installed on the computer), processed images would only be on the cloud (not true). Images/works processed by the CC programs would not be available if the subscription ended (not true if saved in an open format). Could only be used on one computer (not true – can be installed on 2 computers, Windows or Mac, but only used on one at a time). One requirement was that the computer you had the Adobe CC program installed had to periodically connect to an Adobe server to validate the subscription. During the Semester at Sea Voyage, I did need to log onto my account once to validate the subscription.

Fast Forward. Yesterday, every time I tried to open Photoshop, a window opened telling me that my trial period had ended. Well, I have monthly credit card statements that Adobe charged me for my Creative Cloud subscription. Once I logged on to my Adobe account, sometimes I would get a message that I had 0 days left in my trial, other times asking for a serial number. Every now and then I would acknowledge that I had a Creative Cloud subscription and let me use Photoshop. ARRG!!

Elk Passing Gas. Yellowstone National Park. Image taken with a Nikon D2Xs and 200-400 f/4 VR lens (ISO 100, 200 mm, f/4, 1/125 sec). (David J Mathre)

Saturday (24-August-2013) — New Jersey

Technology: Home Network/Home Server.

Since retiring, one of the things I miss is not having the server and networking resources for my computers being supplied and supported by someone else. Thus, I need to become an IT person again. I never was an IT person, but at times had to be an underground IT person when I needed more than the company provided. So, my current needs now that I am retired is a home network, system to back-up (restore) my computers and replicate my image files/database. I am tired of the sneaker-net method to replicate my image files/database. I currently have two computers for image processing (Lenoveo/ThinkPad W700ds and Lenovo/Thinkpad W510) and one for travel (Microsoft Surface Pro). A while back, I looked at the Window Home Server. The original version of Windows Home Server (WHS) was based on Windows Server 2003 R2. HP provided a hardware/OS/software package version called HP MediaServer. Microsoft released a new version Windows Home Server 2011, but indicated that it would be the last release. HP did not provide an upgrade to the 2011 version, and decided to end their MediaServer product line.

The interesting thing is that you can still purchase new 2009 versions of the HP MediaServer. I decided to try one out with the understanding that it may be a dead-end. The HP MediaServer (EX 490) arrived. It is a headless computer (no monitor, no keyboard, no mouse). Everything is controlled remotely. It came with a 1 TB hard-drive (3 empty hard-drive slots). I plugged it in, connected it to my one computer network, and loaded the client software on my computer. Within a short time it was up and running, and configured to do daily backups of the computer it was connected. The three hard-drive slots only support hard-drives up to 2 TB. I tried adding a 3 and 4 TB hard-drive and the computer only recognized half of the space on the drives. Right now the system will support and backup my two Windows 7 systems, but not my Windows 8 Surface tablet.

Although, HP does not support upgrading the system there is a vibrant internet community of Windows Home Server users. I found methods to upgrade to Window Home Server 2011, and Window Server 2013 Essential. There is also someone that is building a monitor/keyboard/mouse cable to facilitate upgrading the headless computer. I like the idea of having a WS 2013E server. I may go this DIY route, because I really do want a real server managing my home server/networking needs. I miss not having a full SQL server, not having SharePoint. Downside, I do need to get back into the IT support business.

Next item of business is setting up the home network (hardwired vs WiFi), connection to the Internet, bridging the internet connection to all of the devices, Firewalls, etc). Microsoft is discontinuing the TechNet subscription program. I had it before when I was doing my underground IT work, and just signed up for its final year. A lot I need to relearn/refresh on as I set up and optimize my home server and network.

Friday (23-August-2013) — New Jersey

Technology – Never Enough Storage Space.

Although the capacity of hard drives has increased, and the cost/(MB, GB, TB) has gone down, technology lets us collect more and more data. Each image I take with the 36 MP Nikon D800 and save in RAW format takes up ~40 MB of storage space. I’m the type of person that saves every image (other than the ones that are totally white or black, totally out of focus). I like to go back and review the images to learn from my mistakes, and also get ideas of things that I want to do better when returning to a site I have photographed before. As the image processing software has improved, I find that I can reprocess images to get something good/interesting out of a previously rejected/not-interesting image. (Just ask the photographer that had images of Monica with Bill).

Well, this year with all of my travel I hit the wall again with my data storage. I started off a few years ago with one (Lenovo ThinkPad W700ds) then a 2nd (Lenovo ThinkPad W510) computer at home that I use to process images, each with a collection of disks with images. I also keep a 3rd set of the original images offsite. I first used a collection of Western Digital MyBook 2-disk arrays – but ran out of USB, Firewire, and eSata ports on my computers. I then upgraded to a Drobo 800i (8 x 2 TB disk array) that was connected to my primary computer via gigabyte Ethernet. I finally had all of my images in one place. Life was good until I needed to expand the storage space. To upgrade to a (8 x 3 TB disk array), I had to replace the disks in the Drobo one at a time and then wait 2-3 days for until I could replace the next drive. The same thing happened when the Drobo indicated that a disk had failed – and unfortunately the log files on the Drobo are encrypted so you can’t tell what caused the problem. One of the “failed” disks that I replaced, I ran a full analysis using the Seagate SeaTools – and found no errors/problems with the disk (I ultimately repurposed the hard drive and have been using it for a year with no problems). I had also been reading other reports on the net about Drobo’s that became bricks, and issues with lack of support after the warranty ended. I decided to investigate other large capacity storage systems, and ultimately decided to try out a Synology DS1812+ system initially with the 8 x 2 TB drives that I just removed from the Drobo 800i.

The Synology disk arrays runs on Linux using a program they call DSM. Much more flexible than the Drobo, and a lot more real-time diagnostic information about the health of the system. The other neat thing about the Synology DS1812+ is that it has two eSata ports that you can add Synology DX513 (five disk arrays). As soon as the Seagate 4TB drives became available at a reasonable cost I added a Synology DX513 with 5 x 4TB Seagate hard drives. You plug it in, and all of a sudden you have another 14.3 TB (one disk fault tolerance) of storage space. This was working well through the beginning of this year – my primary image processing computer (Lenovo W700-ds) using the older Drobo 800i and the secondary image processing computer (Lenovo W510) using the Synology DS1812+ and DX513. I would keep the two disk arrays synchronized using sneaker-net and FolderMatch. (Future project – home server and networking).

After the Semester at Sea Spring 2013 Enrichment Voyage, and my recent trip to Iceland I was getting close to running out of space on my primary system. Then I got a warning light on the Drobo that another drive failed. I ordered a new Seagate 4TB drive and when it arrived (Amazon overnight is great) it took 6 days before I had all green lights on the Drobo again. The other problem that I had was that the Drobo array was not recognized after rebooting the computer. I thought I had a Drobo brick. If I was really patient, the computer would finally see the Drobo array after 30-60 minutes. I can see where others with this problem were not patient enough, gave up on Drobo – and published there rants on the internet. I was beyond the warranty and didn’t want to sit on the phone and pay for support. Enough was enough and I decided it was time to give up on the Drobo, and ordered the newer Synology DS1813+ which I populated with 8 x 4TB Seagate NAS drives and a DX513 with 4 x 4TB Seagate NAS drives. Each array is set up with one disk fault tolerance, and gives me a total of 25.3 + 14.3 = 39.6 TB of capacity for my primary image processing computer. This should get me through another year (or two or three) unless the Nikon D4x comes out at 54 MP 🙂 The Drobo 800i will probably become part of my offsite data storage.

Friday (22-August-2013) — New Jersey

Technology Update: Remote Camera Control.

OK, I said I would try to get back to a daily update to the Blog. I like the idea of being able to control my camera remotely. Over the years I invested in the Nikon WT-3 (for the Nikon D200 camera), the WT-4 (for the Nikon D3, D3s, D3x, D700, D800, and D4 cameras), and the WT-5 (for the Nikon D4 camera). With the early models, Wi-Fi configuration was difficult at best. The current version of the Nikon Wireless Configuration Utility has really improved — setting up a WT-4 or WT-5 to communicate via Wi-Fi to a Windows 7 or Windows 8 computer is now very simple (and works!!!). You need the Nikon Camera Control Pro 2 software (extra cost) to then remotely control the camera.

I’ve read several favorable comments recently about the CamRanger, and its ability to remotely control several Nikon (and Cannon) DSLR cameras. CamRanger is a modified TP-Link USB Wi-Fi transmitter. It connects to the USB 2 (or 3) port on the camera and communicates to an i-Phone, i-Pad, or Android device via Wi-Fi. CamRanger provides software to control the camera. In addition to normal control (settings, focus, etc.) the software would do HDR, time-lapsed, and focus stacking. Well, I don’t own an i-Phone, i-Pad, or Android device – but did get interested when CamRanger released a beta version of software to control the camera from a Windows 7 or 8 computer. I ordered one and it arrived 2 days later. Downloaded the beta software, and just started playing with it. The software is beta. I was able connect to a D3s and D800 camera, set various settings, use real-time live view, select the focus point, focus, and take images which were then sent to my Windows 8 Surface computer (images also still stored in the cameras CF or SD memory card). The HDR, time-lapsed, and focus stacking modes don’t work yet. I’m eager to see the full (release) version of the software with all of the capabilities enabled.

For a lark, I connected the CamRanger to my Nikon 1 V2 camera (which is not listed as being supported by CamRanger). The camera was recognized (but I got a warning message the camera was not supported, and CamRanger would not be liable for damage). The beta software on my computer was able to read the camera settings, make some setting changes, but live view didn’t work. When I tried to take a picture, I heard the shutter – but the program (and camera froze) when sending the image from the camera to the computer. I needed to remove the battery from the camera to get it to work again. I really do hope that CamRanger adds this camera in the future – especially for the HDR and time-lapsed capabilities (missing from the Nikon 1 V2 camera).

Two-Years Ago (21-August-2011) — New Jersey

Summer Nature at the Sourland Mountain Preserve.

American Goldfinch on a Thistle. Image taken with a Nikon D3s and 300 mm f/2.8 VR lens + TC-E III 20 teleconverter (ISO 250, 600 mm, f/5.6, 1/500 sec).

American Goldfinch on a Thistle. Sourland Mountain Preserve, Summer Nature in New Jersey. Image taken with a Nikon D3s and 300 mm f/2.8 VR lens + TC-E III 20 teleconverter (ISO 250, 600 mm, f/5.6, 1/500 sec). Raw image processed with Capture One Pro 6, Nik Define, and Photoshop CS5. (David J Mathre) — American Goldfinch on a Thistle. Image taken with a Nikon D3s and 300 mm f/2.8 VR lens + TC-E III 20 teleconverter (ISO 250, 600 mm, f/5.6, 1/500 sec). Raw image processed with Capture One Pro 6, Nik Define, and Photoshop CS5. (David J Mathre)